Eliminator Bore Cleaner
Description
Bore Tech Eliminator™ Bore Cleaner is the premier, state-of-the-art bore cleaner that has taken the shooting industry by storm. The revolutionary and patented formula is 100% barrel safe, biodegradable, and easily outperforms the competition. Eliminator bore cleaner rapidly removes carbon and copper fouling without the safety hazards, harmful toxicity, and unpleasant odors found in competitive cleaners.
Bore Tech Eliminator™ Bore Cleaner is the patented, fast-acting, barrel-safe, non-ammonia bore solvent that has taken the shooting industry by storm. Eliminator gun bore cleaner has been proven to surpass the rigorous demands of the modern-day shooter and is the cleaner of choice by shooters worldwide who demand the best.
ELIMINATOR BORE CLEANER QUICKLY REMOVES
| CARBON | COPPER |
| LEAD | CORROSIVE RESIDUE |
ELIMINATOR IS 100%
| BARREL SAFE | NON HAZARDOUS | AMMONIA FREE |
| ODOR FREE | BIODEGRADABLE | USER FRIENDLY |
Eliminator’s proprietary formulation is a combination of ingredients that can simultaneously cut through heavy layers of carbon and copper fouling that accumulate during shooting.
Eliminator begins its assault on fouling by utilizing a strategic blend of chemical surfactants that quickly loosen and release carbon deposits from the barrel’s surface. These surfactants also effectively neutralize all corrosive residues preventing barrel damaging rust and corrosion.
During the removal of carbon fouling, Eliminator also uses an unparalleled process that rapidly oxidizes copper fouling and suspends it in the cleaning solution, rendering it unable to redeposit onto the barrel surface. This exclusive technology allows for the continued and complete extraction of both carbon and copper fouling at full strength without becoming saturated and losing effectiveness.
Bore Tech Eliminator is 100% ammonia free and barrel safe. It will not etch or harm barrel steels and can be safely left to soak in the bore for an infinite period of time. In addition, the Eliminator also contains a short term rust preventative, which shields and conditions the firearm’s bore after cleaning. Just dampen your last patch with Eliminator and your bore will be protected against rust and corrosion for up to 2 weeks.
Bore Tech Eliminator is the best bore cleaner that quickly eliminates carbon and copper fouling without the hazards, toxicity, and odors found in competitive cleaners. Rapidly remove fouling from your bore and all the other cleaners from your bench… Bore Tech Eliminator Bore Cleaner.
Are your firearms Bore Tech Eliminator Clean?
Bore Tech - Redefining Gun Care
Proudly made in the USA
Eliminator™ Bore Cleaner has all of the most important features that any gun cleaning solvent should have.
Important Gun Bore Solvent Features Include:
- 100% Barrel Safe
- Odor Free
- 100% Biodegradable
- Contains No Ammonia
- Acts As A Short-Term Rust Preventative
- Non-Flammable
- Made in the USA
- Packaged In A Treated HDPE Plastic Bottle for longer storage
- Twist Open/Close Dispensing Cap w/ foam gasket seal
Please see our convenient and easy to use Chemical Selection Guide by clicking the below image or going to the Knowledge Center.
Chemical Selection Guide
Bore Tech Eliminator™ Bore Cleaner Use Instructions
UNLOAD FIREARM
1) Wet 3 to 4 Bore Tech X Count patches with Eliminator Bore Cleaner and individually push through bore to remove loose fouling. Only push patches through the bore in ONE direction.
2) Next, make 10 to 15 passes with a tight fitting Bore Tech Proof-Positive Nylon brush saturated with Eliminator.
3) Then repeat Step 1 and let Eliminator soak for 3 to 5 minutes. For badly fouled rifles, extended soak times may be needed.
4) Finally, push dry patches through the bore until they come out clean.
5) Repeat above steps if necessary.
6) For extended storage or in adverse conditions apply Bore Tech Friction Guard XP Gun Oil.
7) Before using firearm, always run a dry patch through the bore. This will remove any residue and ensure against obstructions.
Q: What is the difference between Eliminator, Cu+2 Copper Remover and C4 Carbon Remover?
A: The Eliminator removes both carbon and copper fouling and is recommended for most regular fouling situations. It provides a quick, easy and great overall clean. For extreme fouling situations the specific Cu+2 Copper Remover (Copper Removal Only) and C4 Carbon Remover (Carbon Removal Only) are recommended. These solutions directly target and effectively focus on removing their respective fouling types. Please see our Chemical Selection Guide located in the Specification Tab or in our Knowledge Center for more information.
Q: Is Eliminator safe to leave soak in a barrel overnight?
A: Yes, the Eliminator can be left to safely soak in barrels for an infinite time period.
Q: Does Eliminator contain ammonia or any other barrel damaging components?
A: No, the Eliminator Bore Cleaner is 100% barrel safe.
Q: Is the Eliminator safe for use on chrome lined barrels?
A: Yes, the Eliminator can be safely used on chrome lined barrels, chromoly steel barrels, stainless steel barrels and any other commonly used barrel steel.
Q: Is the Eliminator safe if it gets on my rifle stock?
A: The Eliminator is safe on all polymer, fiberglass, laminated or polyurethaned wood. However, if the Eliminator comes in contact with an oiled wooden stock, it might cause a blemish by removing the oil and require reapplication of sealing oil.
Q: Can Eliminator be used on the outside of my rifle barrel?
A: Yes, the Eliminator can be safely used on the outside of a rifle barrel to remove copper fouling. Once finished cleaning be sure to wipe the cleaned area dry and apply Bore Tech Shield XP Rust Preventative.
Q: Can Eliminator be used on nickel plating?
A: Yes, the Eliminator can be used on nickel plating but cannot be left in contact for more than 3-5 minutes. Extended contact can lead to darkening or discoloration of the plating. Do not use on plating that has been damaged or worn.
Q: Can Eliminator be used as a lubricant?
A: No, the Eliminator Bore Cleaner is a cleaner not a lubricant. Use Bore Tech Friction Guard XP Gun Oil for superior lubrication.
I have worked in the firearms industry for over 30 years and as a result become pretty jaded to the "new, great & green" oils and solvents. Most being at best no better and many worse than the what I have been using since the 80s. However this year a friend convinced me to try Bore Tech and I have been very impressed!! I started with the carbon cleaner for .22LR with excellent results so I ordered the Eliminator & Copper solvents. All have preformed magnificently! Highly Recommend!!!
Safe & Effective Bore Cleaner, also works great to Remove Carbon from guns, AR15 Bolts, carriers, revolver cylinder faces, etc. It Does remove Copper too! No Smell and Easy to use
Works great over all. Does remove fouling, copper included. I took a gun that i had run a bore snake with a CLP type oil on it and got a lot more out. I cleaned a barrel traditionally, patches, brush, patches until clean. I then used eliminator and got a lot more out. Its not perfect or a magic bullet, but it is the best thing I have found. one note of caution, the reason for my 4 stars, it will eat polyurethane coatings off your table. thankfully mine needs refinished anyways but be careful.