Shotgun Blend
Description
Bore Tech Shotgun Blend Bore Cleaner is a specialty, cutting edge bore cleaner that is 100% barrel safe, biodegradable and easily outperforms the competition without any hazards, toxicities or offensive odors. Shotgun Blend rapidly removes the powder, lead and stubborn wad fouling produced by today’s shotgun ammunition. It is time to bring your Shotgun cleaning into the 21st century.
Bore Tech’s Shotgun Blend Bore Cleaner is a specially formulated bore cleaner that effectively cleans lead, powder and plastic wad fouling from barrels, forcing cones and choke tubes with ease. Shotgun Blend surpasses the rigorous demands of the 21st century shotgun shooter and has become the cleaner of choice for world renowned trap, skeet and competition shooters.
Shotgun Blend’s proprietary formulation features a combination of chemicals that contains no ammonia, no offensive odors and is 100% biodegradable. It has the ability to simultaneously cut through the layers of lead, carbon and plastic wad fouling that accumulate inside the barrel.
SHOTGUN BLEND QUICKLY REMOVES
| CARBON | PLASTIC WAD FOULING |
| LEAD | CORROSIVE RESIDUE |
SHOTGUN BLEND IS 100%
| BARREL SAFE | NON HAZARDOUS | AMMONIA FREE |
| ODOR FREE | BIODEGRADABLE | USER FRIENDLY |
Shotgun Blend uses an exclusive blend of surfactants, penetrants and releasing agents to penetrate and lift lead and plastic wad fouling off of the barrel’s surface. The proof is on the patch, so do not be surprised when you see flecks of lead and strands of plastic wad fouling coming out the end of your bore!
Bore Tech’s Shotgun Blend is the choice for discriminating shotgun shooters who demand nothing short of total performance from their shotgun.
Are your shotguns Bore Tech Shotgun Blend clean?
Bore Tech - Redefining Gun Care
Proudly made in the USA
SHOTGUN BLEND
| Bottle Type | Treated HDPE Plastic |
| Cap Type | Twist Open/Close Dispensing Cap w/ foam gasket seal |
| 100% Barrel Safe |  |
| Odor Free | |
| Non-Hazardous | |
| 100 % Biodegradable | |
| Contains No Ammonia | |
| Short Term Rust Preventative | |
| Non-Flammable | |
Please see our convenient and easy to use Chemical Selection Guide by clicking the below image or going to the Knowledge Center.
Chemical Selection Guide
Bore Tech Shotgun Blend Use Instructions
UNLOAD FIREARM
1) Wet 3 to 4 Bore Tech X Count patches with Shotgun Blend and individually push through bore to remove loose fouling. Only push patches through the bore in ONE direction.
2) Next, make 10 to 15 passes with a tight fitting Bore Tech brush saturated with Shotgun Blend.
3) Then repeat Step 1 and let Shotgun Blend soak for 5 to 10 minutes. For badly fouled rifles, extended soak times may be needed.
4) Finally, push dry patches through the bore until they come out clean.
5) Repeat above steps if necessary.
6) Before storing firearm, dampen a patch with Shotgun Blend and push through bore. This will protect against rust/corrosion for up to 2 weeks under normal storage conditions.
7) For extended storage or in adverse conditions apply Bore Tech Friction Guard XP Gun Oil.
8) Before using firearm, always run a dry patch through the bore. This will remove any residue and ensure against obstructions.
Q: Is Shotgun Blend safe to leave soak in a barrel overnight?
A: Yes, the Shotgun Blend can be left to safely soak in barrels for an infinite time period.
Q: Does Shotgun Blend contain ammonia or any other barrel damaging components?
A: No, the Shotgun Blend is 100% barrel safe.
Q: Can Shotgun Blend be used to clean my choke tubes?
A: Absolutely, the Shotgun Blend is a fantastic choke tube cleaner and will remove the stubborn carbon and lead fouling.
Q: Is the Shotgun Blend safe if it gets on my rifle stock?
A: The Shotgun Blend is safe on all polymer, fiberglass, laminated or polyurethaned wood. However, if the Shotgun Blend comes in contact with an oiled wooden stock, it might cause a blemish by removing the oil and require reapplication of sealing oil.
Q: Can Shotgun Blend be used on the outside of my rifle barrel?
A: Yes, the Shotgun Blend can be safely used on the outside of a rifle barrel to remove lead and carbon fouling. Once finished cleaning be sure to wipe the cleaned area dry and apply Bore Tech Shield XP Rust Preventative.
This is the best solvent that I have ever used!!! I made one motion with a patch just after finish of shooting and some motions at home and all clean, like new. Thanks to the developers!!!
I just received my Shotgun Blend today and after pumping 350 shells of mixed loads of high brass and low brass out of my Kel-Tec KSG I have taken off my barrel and after looking down it, it looked horrible, I ran a loose patch with the Shotgun Blend solvent through the barrel, then I ran the spiral brush a few times, then the final jag, and the barrel is like a mirror. Awesome products guys, I can't wait to order some stuff for my rifles.
I have used this product for a season of sporting clays and have been impressed. It works very well and doesn't stink up the house. I will buy more.