Decimator Suppressor Cleaner
Description
Finally, an Effective, Simple and Safe way to clean and maintain your suppressors! Bore Tech’s Decimator Suppressor Cleaner, is the industry’s only cleaner specifically formulated to safely and effectively remove the extreme fouling buildup inside suppressors. Decimator effortlessly cleans Rimfire and Centerfire suppressors as well as muzzle breaks!
Sold as a 2 bottle set. For use with the Decimator Suppressor Cleaning System.
Finally, an Effective, Simple and Safe way to clean and maintain your suppressor! Introducing Bore Tech’s Decimator Suppressor Cleaners, the industry’s only cleaners specifically formulated to safely remove the extreme fouling buildup found in suppressors. When used in conjunction with the Decimator Suppressor Cleaning System, these cleaners are an unbeatable combination.
These proprietary formulas effectively clean both Rimfire and Centerfire suppressors. They also work great on muzzle breaks, QD mounts and flash hiders. Decimator is safe for Aluminum, Stainless Steel, Titanium and a wide variety of today’s most commonly used alloys and coatings.
DECIMATOR IS 100%
| SUPPRESSOR SAFE | NON HAZARDOUS | AMMONIA FREE |
| ODOR FREE | BIODEGRADABLE | USER FRIENDLY |
The Decimator Suppressor Cleaners feature a two part formula to combat the extreme fouling buildup inside suppressors. Decimator - Part A focuses on the stubborn carbon/lead buildup inside the suppressor while Decimator - Part B focuses on the heavy buildup of copper fouling.
The figure below shows the BEFORE and AFTER results on a .243cal/6mm caliber suppressor with approximately 12,000 + rounds fired. Observe the thick, jagged layers of carbon and copper that have accumulated on the baffle surfaces in the BEFORE picture.
.jpg)
After three complete cycles using the Decimator Suppressor Cleaning System, over 102 grams or 0.225 pounds of fouling was removed. That is equivalent to the powder used in over 7 rounds of .50 BMG!!!
Below is the actual fouling removed during the different cycles of the Decimator Suppressor Cleaner. A US Penny (0.750” in diameter) was placed next to the fouling for size reference purposes.
.jpg)
Protect your suppressors by effectively cleaning and maintaining them with the Decimator Suppressor Cleaners & Decimator Suppressor Cleaning System.
Are your suppressors Bore Tech Clean?
Bore Tech - Redefining Gun Care
Proudly made in the USA
Decimator Suppressor Cleaner
Sold as a 2 bottle set: 1-Bottle Part A & 1-Bottle Part B
| Bottle Type | Treated HDPE Plastic |
| Cap Type | Twist Open/Close Dispensing Cap w/ foam gasket seal |
| 100% Suppressor Safe |  |
| Odor Free | |
| Non-Hazardous | |
| 100 % Biodegradable | |
| Contains No Ammonia | |
| Non-Flammable | |
Q: Do the Decimator Suppressor Cleaners work on both Rimfire & Centerfire Suppressors?
A: Yes, The Decimator Suppressor Cleaners safely and effectively clean both rimfire and centerfire suppressors.
Q: Are the Decimator Suppressor Cleaners aluminum safe?
A: Yes, when used as directed, the cleaners are safe for use on aluminum baffles.
Q: Can I use the cleaners in an ultrasonic cleaner?
A: No, it is not recommended to use the cleaning solutions in an ultrasonic cleaner.
Q: Can I mix both cleaners together?
A: It is not recommended to mix the cleaners together. No harm to the suppressor will occur, however it will dramatically slow down both cleaners and not provide the optimal cleaning strength.
Q: Can I reuse the cleaner?
A: No, it is not recommend to reuse the cleaner. Once you see how dirty the solution becomes you will understand why!
Q: How many suppressors can I clean with these bottles?
A: You can get 3-5 complete cleanings with the provided 16oz bottles.
Q: Do I need to dry my suppressor once finished cleaning?
A: It is recommended to completely dry your suppressor before firing. Do NOT fire suppressor when full of cleaner or water as damage/injury may result.
