Decimator Suppressor Cleaning System
Description
Finally, an Effective, Simple and Safe way to clean and maintain your suppressors! Bore Tech’s Decimator Suppressor Cleaning System, is the industry’s only cleaner specifically formulated to safely and effectively remove the extreme fouling buildup inside suppressors. Decimator effortlessly cleans Rimfire and Centerfire suppressors as well as muzzle breaks!
Finally, an Effective, Simple and Safe way to clean and maintain your suppressors! Bore Tech’s Decimator Suppressor Cleaning System, is the industry’s only cleaner specifically formulated to safely and effectively remove the extreme fouling buildup inside suppressors. Decimator effortlessly cleans Rimfire and Centerfire suppressors as well as muzzle breaks!
This innovative system effectively cleans the extreme amounts of fouling in both sealed and take-apart suppressors. Decimator is safe for Aluminum, Stainless Steel, Titanium and a wide variety of today’s most commonly used alloys and coatings.
The Decimator Suppressor Cleaning System features:
• Stainless Steel Suppressor Stand accommodates .17cal to .50cal suppressors and securely holds suppressor while catching any cleaner overflow
• 16oz Decimator Cleaner - Part A focuses on the stubborn carbon/lead buildup inside the suppressor
• 16oz Decimator Cleaner - Part B focuses on the heavy buildup of copper fouling inside the suppressor
• Trigger Spray Handle & Flushing Lance w/ Splash Shield* effectively flushes and removes all loosened fouling from inside the intricate chambers, passages and holes.
*For best results use 1,500-2,500psi Pressure Washer (Not Included)
It is proven that suppressors accumulate significant amounts of corrosive fouling during use. As fouling builds accuracy and sound/flash suppression deteriorate. If fouling accumulates to a critical level, significant damage can occur.
During extensive R&D, cleaning intervals were determined based off of rounds fired and the associated weight gained from fouling. Following these recommendations makes it quick, easy and effective to properly clean and maintain suppressors.
Higher round counts lead to expodential accumulation of fouling as fouling likes to “stick” to fouling. This in combination with the extreme temperatures and pressures seen during shooting leads to fouling layers becoming harder, denser, thicker and much more difficult to remove.
The figure below shows a .243/6mm caliber suppressor with approximately 12,000 + rounds fired. Observe the thick, jagged layers of carbon and copper fouling that have accumulated on the baffle surfaces in the BEFORE picture.
.jpg)
After three complete cycles using the Decimator Suppressor Cleaning System, over 102 grams or 0.225 pounds of fouling was removed. That is equivalent to the powder used in over 7 rounds of .50 BMG!!!
Below is the actual fouling removed during the different cycles of the Decimator Suppressor Cleaner. A US Penny (0.750” in diameter) was placed next to the fouling for size reference purposes.
.jpg)
Protect your suppressors by effectively cleaning and maintaining them with the Decimator Suppressor Cleaning System.
Are your suppressors Bore Tech Clean?
Bore Tech - Redefining Gun Care
Proudly made in the USA
Packaging: Cardboard Box
Dimensions: 17.5” x 6” x 6”
Includes
| • Stainless Steel Suppressor Stand | • Trigger Spray Handle |
| • 16oz Decimator Cleaner - Part A | • 4-Multi Caliber Silicone Plugs |
| • 16oz Decimator Cleaner - Part B | • Quick Disconnect Lance Adapter |
| • Flushing Lance w/ Splash Shield | • Trigger Spray Handle M22 Adapter |
Suppressor Stand
• Accommodates .17cal to .50cal Suppressors (3/4” OD to 3.0” OD)
Flushing Lance:
• Accommodates.17cal to .50cal Suppressors (12” Working Length)
Trigger Spray Handle
• Standard 14mm M22 Adapter Included
• For best results use 1,500-2,500psi Pressure Washer (Not Included)
• Optional 5/8” Garden Hose Adapter Available For Purchase
Bore Tech Decimator Suppressor Cleaning System
Use Instructions
Assembly Instructions
Q: Does the Decimator Suppressor Cleaning System work on both Rimfire & Centerfire Suppressors?
A: Yes, The Decimator Suppressor Cleaning System can safely and effectively clean both rimfire and centerfire suppressors.
Q: What caliber suppressors does this system work on?
A: The Decimator Suppressor Cleaning System will clean most .17cal to .50cal suppressors.
Q: Is the Decimator Suppressor Cleaner aluminum safe?
A: Yes, when used as directed, the cleaners are safe for use on aluminum baffles.
Q: Can I use the cleaners in an ultrasonic cleaner?
A: No, it is not recommended to use the cleaning solutions in an ultrasonic cleaner.
Q: Can I reuse the cleaner?
A: No, it is not recommend to reuse the cleaner. Once you see how dirty the solution becomes you will understand why!
Q: How many suppressors can I clean with these bottles?
A: You can get 3-5 complete cleanings with the provided 16oz bottles.
Q: Do I have to use a pressure washer to flush the suppressors?
A: It is recommended to use a 1,500 – 2,500psi pressure washer to flush the suppressors once cleaning is complete. This provides enough pressure and flow for optimal flushing.
Q: Will my pressure washer hose thread into the flushing lance?
A: The provided 14mm M22 adapter is the most common pressure washer thread.
Q: Do I need to dry my suppressor once finished cleaning?
A: It is recommended to completely dry your suppressor before firing. Do NOT fire suppressor when full of cleaner or water as damage/injury may result.
Turns out that sealed rifle cans are NOT "self cleaning"! I own an SRD762 can that I recently realized has picked up an incredible half POUND of carbon over the years I've had it, and when sending it in to SIG themselves resulted in them just returning it as-is, with the note "sorry, nothing we can do", I decided to try this product instead. All I can say is, it works! Every cycle is removing gobs of carbon from the can, and I'm looking forward to it feeling and performing like brand new again.
