Patch Guide - AR-15/AR-10
Description
Bore Tech’s Patented AR-15/AR-10 PATCH GUIDES feature an industry exclusive, hands-free patch spiking system that eliminates the mess and hassle of spiking patches on cleaning rods. Each guide precisely aligns cleaning rods with the bore and prevents damage to your firearm & cleaning rod. Featuring interchangeable, front adapters there is always a guide to fit your specific rifle model and caliber.
Bore Tech’s Patented AR-15/AR-10 PATCH GUIDES feature an industry exclusive, hands-free patch spiking system that eliminates the mess and hassle of correctly spiking patches. These guides dramatically simplify and expedite the cleaning process.
Simply lay a patch over the opening on the angled patch plate, wet the patch with cleaner and push your rod down the bore. The angled patch plate effortlessly spikes your patch, eliminating messy cleaners on your hands, rifle stock and cleaning bench. The Patch Guide also alleviates the cumbersome patch spiking process on longer cleaning rods.
Each guide features precision CNC machined and anodized aluminum components and is designed to precisely align the cleaning rod with the rifle bore. This prevents cleaning rods from dragging on the locking lugs and chamber edges of your rifle. It also minimizes the possibility of damage to your cleaning rod. Simply put, the Patch Guide is a necessary tool for proper cleaning and protection of both your rifle and cleaning rod.
Featuring interchangeable, solvent resistant, front adapters the AR Patch Guides allows for quick and cost effective rifle model/caliber changes. Simply loosen the set screw located under the patch plate and remove the adapter. Additionally, the lengthened adapter design locates the angled patch plate safely behind your optics and also holds the upper and lower receiver apart allowing for effortless cleaning.
Additional adapters are available for most popular AR-15 and AR-10 calibers and are found on the AR-15/AR-10 Patch Guide Adapter product page. If you don’t see a Patch Guide that will fit your specific rifle, please contact Customer Service to inquire about our custom order Patch Guides.
The AR-10 Patch Guide will not work with Sig Sauer 716i platform. The 9MM Patch Guide will not work JP Enterprises JP5 9MM PCC.
Why settle for anything less than perfection? Choose the best… Choose the Bore Tech AR-15/AR-10 Patch Guide.
Bore Tech - Redefining Gun Care
Proudly made in the USA
AR-15/AR-10 PATCH GUIDE
Patch Guide Color/Caliber Identification Chart
| Color | Caliber | Platform |
| Gold | .17 - .25 Cal | AR-15 |
| Red | .25 - .30 Cal | AR-10 |
AR-15 Patch Guide Length: 13.5 Inches
AR-10 Patch Guide Length: 17.5 Inches
Bore Tech AR Patch Guides Will Add Approximately 13.5-17.5 Inches To The Length Of The Barrel When Cleaning. Make Sure Your Cleaning Rod Is Long Enough To Accommodate.
Please see our convenient and easy to use Rod Length Guide by clicking the below image or going to the Knowledge Center.
How To Determine The Correct Rod Length For Your Application
Bore Tech AR-15/AR-10 Patch Guide Use Instructions:
1) Remove bolt as per manufacturer’s instructions.
2) Insert Patch Guide through the receiver until seated in the chamber.
Tip: Once you feel slight resistance from the O-ring sealing in the chamber, STOP! Pushing too hard/far can cause the O-ring to tear.
3) Position a dry patch of the proper size on the patch plate and apply cleaner or oil to the patch.
4) Push the rod forward catching or “spiking” the patch and proceed down the bore.
5) The patch plate also allows for application of cleaner to brushes.
6) To remove the Patch Guide from the action, lightly twist and pull the guide back away from the chamber and out of the upper receiver.
NOTE: A small drop of oil on the O-ring will prevent wear and extend O-ring life.
To Change Adapter:
1) Locate hex drive set screw under angled patch plate.
2) Using an 1//8” hex key loosen the set screw.
3) Remove adapter.
4) Insert new adapter. On certain rifles adapters must be rotated to the correct position so the angled patch plate faces directly up.
5) Tighten set screw.
Q: Do the Patch Guides come with the front adapter?
A: Yes, all Patch Guides come complete with the front adapter and the rear angled patch plate assembly. It is complete and no additional pieces are needed for the rifle selected from the product selection drop down.
Q: What length rod do I need to use with this Patch Guide?
A: Please see our Knowledge Center for assistance in determining the proper rod length for your application.
Q: How long are the Patch Guides?
A: The AR Patch Guide lengths are displayed under the Specification tab. Our AR-15 guides are 13.5” long and AR-10 guides are 17.5” long.
Q: Can I get replacement O-rings?
A: Yes, please contact a Customer Service Representative so we can be sure to provide you with the correct O-Rings for your AR Patch Guide.
Your Bore Stix and bore guides are top of the line. I have never seen one of better quality.